TF...fix

L = drive on left (R = drive on right, is inverted)
X * X1* Y A* B C* D E F F1 R  H TF-507510 248 236 55 466 215 300 150 230 104 230 124   0 TF-510510 248 248 65 490 275 422 210 299 116 242 176  60 TF-510520 295 248 65 512 270 469 180 267 122 264 177  0 TF-520520 295 295 90 591 330 499 240 340 154 296 208  60

Basics of the drive data
All drive data of the pL LEHMANN rotary tables have been designed for the following
standard spindle loads in accordance with DIN/VDE 0520 as follows:
– For intermittent service S3 ED20%
– Backlash time of five minutes

Any other conditions required the adjustment of the drive data (acceleration,
jerk limitation, rotational speed).

Reference values for duty cycle (Einschaltdauer, ED)
– For normal rotary table work such as milling / boring (mainly positioning): approx. ED 20 %.
– For milling / boring in intensive mixed operation (positioning / feed machining): approx. ED 40 %
– For profile and depth grinding: approx. ED 60 %
– For engraving: approx. ED 80–100 %.

	Center  height  [mm]		Weight   [kg]	Max. spindle   load  [kg]		Clamping            torque  [Nm]		Pull-out torque  [Nm]		Axial  force  [kN]	Moment  of inertia J  [kgm2]		Gear load  [Nm]
				without	with	max					4th axis		5th axis (Reference values)
	fix	vario		support	support	4th axis	5th axis	4th axis	5th axis	4th axis	Standard	Jmax.	Standard	M max.
TF-507510	150	200	61	40	80	300	800	500	1'000	6	0.05	1	30	240
TF-510510	200	220	76	53	106	800	800	1'000	1'000	10	0.2	7	75	240
TF-510520	180	230	104	66	132	800	2'000	1'000	2'500	20	0.2	7	75	420
TF-520520	230	260	139	132	264	2'000	2'000	2'500	2'500	26	0.8	15	200	420

For indexing accuracies, please see the respective EA. For indexing axis with T2-type and/or T3-type rotary tables, please see the respective M2- and/or M3-type rotary table. Please note that the indexing accuracies always apply in the unloaded condition and that swiveling axes may show additional inaccuracies due to material elasticity (mainly for vario or varioX versions). For heavy-duty applications, we recommend using a direct angular position measuring system (See p. 53).

				Feed torque   [Nm]	Spindle RPM.  [min–1]		Cycle time [sec] (without clamping) ***
		Motors 4th/5th		max 4th axis	(axis) max  4th 5th		(axis) min  4th            5th	(axis) min   4th         5th
MAVILOR / MOVINOR **	TF-507510	LH-055/BLS-072		95	111 65		0.25 0.35	0.38 0.58
	TF-510510	BLS-072/BLS-072		250	90 45		0.31 0.55	0.47 0.88
	TF-510520	BLS-072/BLS-073		250	90 40		0.31 0.49	0.60 0.86
	TF-520520	BLS-073/BLS-073		440	50 20		0.37 0.92	0.60 1.67
FANUC	TF-507510	β0.5 is/α2 (HV)is		35	61 45		0.32 0.48	0.57 0.82
	TF-510510	α2 (HV)is/α2 (HV)is		135	55 20		0.34 1.06	0.62 1.81
	TF-510520	α2 (HV)is/α2 (HV)is		315	55 27		0.34 0.76	0.62 1.22
	TF-520520	α2 (HV)is/α2 (HV)is		215	33 10		0.53 2.16	0.98 3.66
YASKAWA	TF-507510	SGM(AH) 04/04		100	55 35		0.34 0.53	0.61 0.96
	TF-510510	SGM(AH) 04/04		120	40 20		0.44 1.17	0.81 1.92
	TF-510520	SGM(AH) 04/08		120	40 24		0.44 0.69	0.81 1.31
	TF-520520	SGM(AH) 08/08		350	27 20		0.62 1.06	1.17 1.81
YASKAWA	TF-507510	SGMJV 04/08		120	66.6 60		0.30 0.39	0.52 0.64
	TF-510510	SGMJV 08/08		210	66.6 40		0.32 0.66	0.55 1.04
	TF-510520	SGMJV 08/08		210	66.6 33.3		0.32 0.56	0.55 1.01
	TF-520520	SGMJV 08/08		340	40 20		0.46 1.12	0.84 1.87
MITSUBISHI	TF-507510	HF-KP 43/73		90	66.6 55		0.30 0.41	0.55 0.68
	TF-510510	HF-KP 73/73		175	66.6 35		0.32 0.73	0.55 1.16
	TF-510520	HF-KP 73/73		175	66.6 30		0.32 0.62	0.55 1.12
	TF-520520	HF-KP 73/73		340	37.5 15		0.48 1.30	0.88 2.30
SANYO	TF-507510	x2AA 06040	x2AA 08075	120	66.6 60		0.30 0.39	0.52 0.64
	TF-510510	x2AA 08075		210	66.6 40		0.32 0.66	0.55 1.01
	TF-510520	x2AA 08075		210	66.6 30		0.32 0.66	0.55 1.16

** 100 % compatible with SIEMENS/HEIDENHAIN
*** For clamping times, please see page 21

For spindle options, please refer to the respective EA rotary table.

You will find acccessories and options in the corresponding PDF documents:
Cabling (DE), Motor (DE), Angular position measuring system (DE) and pL-CNC (DE).